We mould technical parts in technopolymers and superpolymers using precision electric presses. We manage every phase, from mould design to finished component.
We work in sectors where quality is not optional. Our certifications document a structured, verified and continuously evolving production system.
Quality management system active since 2004. Ensures control, traceability and continuous improvement.
ISO certified through a national body member of IQNET, the largest international network of certification organisations.
International standard for environmental quality in the automotive sector. Currently being implemented to meet supply chain requirements.
Not all polymers are the same. And not everyone knows how to process them. We work with technopolymers and superpolymers engineered to replace metal in critical applications, delivering high performance even in extreme conditions — with thermal resistance above 400°C.
Some are complex materials that require specific expertise, dedicated equipment and rigorous process control. That is why we work with precise, repeatable parameters, the result of consolidated experience and applied know-how.
When a component needs to be highly precise down to the millimetre, impact-resistant or optically transparent, the answer is almost always an amorphous polymer.
We work with ABS, PC, PMMA for covers and technical housings, PSU and PES for applications requiring chemical and thermal resistance, up to PEI, PAI and PI — materials with extreme performance that in many cases replace metal where nothing else would hold.
For applications requiring exceptional performance under demanding operating conditions, including exposure to elevated temperatures, semi-crystalline engineering polymers offer an advanced and reliable solution. These high-performance materials provide outstanding thermal resistance, dimensional stability, mechanical strength, and chemical resistance, making them ideal for technically demanding components.
The challenge is not simply selecting a high-performance polymer, but identifying the material that best matches the application's functional requirements, operating environment, and production constraints. Thanks to our extensive expertise in engineering plastics and injection molding, we support customers in choosing the most suitable material to achieve optimal performance, long-term reliability, and cost-effective manufacturing.
Tandem Bosch Brake Servo Piston Component for next-generation tandem brake servo systems, produced in PET reinforced with 35% glass fibre (GF). Offers high mechanical performance, dimensional precision and reliability.
Mini Gears Transmission system consisting of a helical gear and worm screw, produced in PPA reinforced with 30% glass fibre and 15% PTFE. The material combination delivers high wear resistance and a low friction coefficient.
Truck Clutch Half-Piston Technical component for friction control systems in commercial vehicles, produced in PAMXD6 – IXEF 1022/0008, guaranteeing high mechanical resistance, dimensional stability and reliability in automotive applications.
Precision-engineered assembly consisting of OT63 brass electrical contacts with silver/tin plating (Ag+Sn) integrated into a PBT carrier frame, specifically designed for high-precision insert overmolding applications. This solution ensures dimensional accuracy, reliable electrical performance, and consistent manufacturing quality for technical connectors and electromechanical components.
High-precision gear designed for thermostat control and temperature regulation systems, manufactured from 30% glass fiber reinforced PEEK (Polyether Ether Ketone). This advanced engineering polymer provides exceptional thermal resistance, mechanical strength, and dimensional stability, making it ideal for applications operating under demanding temperature and performance conditions.
1 Fanuc electric press at 180 tonnes, equipped with a bi-metal plasticising unit with Ø48mm screws and moulding volume up to 350 cm³. Dedicated to medium-sized technical parts.
Possible processes:
medium-sized technical part moulding.
4 SUMITOMO electric presses with bi-metal plasticising units and Ø45mm screws, moulding volume up to 300 cm³.
Possible processes:
high-performance technical part moulding, maximum repeatability and high precision.
2 TOYO electric presses with bi-metal plasticising units and Ø36mm screws, moulding volume up to 150 cm³.
Possible processes:
high-performance technical part moulding, maximum repeatability and high precision.
5 Sumitomo and Toyo electric presses at 50 tonnes, with bi-metal plasticising units and Ø28 and Ø20mm screws.
Possible processes:
precision moulding of small technical parts and micro-components in high-performance technopolymers and superpolymers.
Hydraulic injection molding machine designed for the production of components with metal inserts and multi-material polymer applications.
The rotary table configuration enables the use of multiple molds, optimizing cycle times and improving productivity while efficiently managing complex insert overmolding processes.
Hydraulic injection molding machine specifically engineered for the production of micro-precision components with metal inserts. The sliding table system allows the use of dual molds when required, increasing production efficiency and ensuring high levels of accuracy and repeatability in insert molding applications.
Over recent decades we have progressively replaced hydraulic presses with electric machines — Toyo, Sumitomo, Fanuc — more precise, more repeatable and more energy-efficient.
Download the articles:
